More progress on Sputnik XII. All the electronics were wired up, including the stand. Turns out the mass of the build is a little on the heavy side for the stand joint, so I reinforced it with a slight angle. The side bulges had a square hole filed to fit the nav markers so they peek out just a bit. I also routed the orange LEDs to the engines, which are Stephan’s handiwork. 3 for the big one, 1 for each little one. The 6 “fins” were also finished out with a fiber optic strand running the length so the tips will flash. I’ll probably also add a beacon on the top and bottom of the main sphere, too. Still plenty of building to do!